BEHIND THE SCENES
PoE Splitter Box
Our one-input to four-output PoE Splitter permits for multiple fixtures to be powered by an individual port, maximizing output on the PoE switch.
Ability to hold all hardware components, allowing flexibility in fixture usage and configuration.
Ability to control RGBW fixtures as wells as four (4) individual luminaires. It also offers an control input for switches/sensors plus a 48Vdc and 24Vdc output
Wall Switch - Model 1
Our PoE Wall Switch is available in two models and is easily installed into a standard gang box. The Model 1 version has On, Cancel, Up, and Down Controllable Features.
Our 2-Wire, Patented, low voltage battery back-up sits neatly inside your PoE fixture for added protection against loss of power. Exceeds standard operating code of 90 minutes at 25% power and is UL 924 Tested.
Advanced Wall Switch
Our PoE Wall Switch is available in two models and is easily installed into a standard gang box. The 4 button version has On, Cancel, Up, and Down Features. The 7 button adds three scene buttons.
RJ45 Two Wire Adapter
This RJ45 adapter connects to a standard LED fixture, allowing for integration into the inspextor platform.
RJ45 Right Angle Cable
The 2-wire RJ45 connector allows installers to turn virtually any LED luminaire into a PoE-enabled fixture that can be controlled with the Inspextor system.
Our rack-mounted server provides the software to fully control your system.