Technical Resources

PoE Backup Power: What During a Power Outage?

During a PoE power outage, connected devices will normally lose power if the PoE switch or other Power Sourcing Equipment (PSE) supplying them loses its electrical power. Power over Ethernet can eliminate the need for a separate power connection at each connected device, but the network equipment still needs a source of electricity.

This creates an important advantage when planning backup power. Because many PoE devices may receive power from centralized network equipment, providing backup power to that equipment can potentially keep multiple connected devices operating during an outage.

Does PoE Work When the Power Goes Out?

PoE does not generate electricity. A PoE switch receives electrical power and converts it into the DC power delivered through Ethernet cabling to connected devices.

If the switch loses power, its PoE ports stop supplying power. Devices relying entirely on those connections will normally shut down.

The same principle applies to other PSE equipment. A PoE injector also requires an electrical source, so an injector that loses input power can no longer provide PoE to its connected device.

What Happens to PoE Devices When Power Is Restored?

When electrical service returns, the PoE switch or other PSE can restart and reestablish its connections with powered devices.

Standards-based PoE equipment performs detection before applying normal PoE power. The PSE determines that a compatible Powered Device (PD) is connected and then provides the appropriate power according to the equipment and PoE standard.

Connected devices may also require time to restart. A camera, wireless access point, sensor, controller or other device may need to boot and reconnect to the network before normal operation resumes.

For this reason, restoration of building power does not necessarily mean every networked device becomes operational at exactly the same moment.

Can a UPS Keep PoE Devices Running?

Yes. An Uninterruptible Power Supply (UPS) can provide temporary backup power to network equipment when normal electrical power is interrupted.

If a PoE switch is connected to a properly sized UPS, the switch can continue supplying power to its connected PoE devices while the UPS has sufficient battery capacity.

This is one of the advantages of centralized PoE infrastructure. Instead of placing a separate battery backup at every connected device, backup power can sometimes be provided at the network equipment serving many devices.

How long those devices remain operational depends on the UPS capacity and the total electrical load placed on it.

Does a UPS Need to Account for the PoE Power Budget?

Yes. The UPS needs to support the electrical requirements of the switch itself as well as the PoE load being supplied to connected devices.

A switch powering only a few low-power devices may have substantially different backup requirements from a switch operating dozens of higher-power devices.

The PoE power budget therefore becomes relevant when planning backup power. Designers need to know what devices must remain operational, how much power they require and how long backup operation is expected.

The UPS also has its own power and runtime ratings, so the PoE power budget and UPS capacity are related but separate calculations.

Which PoE Devices Should Stay On During an Outage?

Not every connected device necessarily needs backup power. The answer depends on the purpose of the system and the building’s operational requirements.

Security cameras, access-control equipment, network infrastructure and certain sensors may be considered important during an outage. Other devices may be allowed to shut down until normal electrical service returns.

Intelligent building systems can contain many PoE-powered devices, so determining which equipment needs backup operation during system design can prevent unnecessary backup-power capacity while protecting critical functions.

What About PoE Lighting During a Power Outage?

Normal PoE lighting can shut down if the network equipment supplying it loses power. However, emergency lighting is a separate consideration because designated fixtures may be required to continue operating when normal building power is unavailable.

A PoE lighting system can address this through appropriately designed backup-power or emergency-lighting equipment.

Our guide to PoE emergency lighting explains how battery-backed emergency equipment and other backup strategies can maintain required illumination during an outage.

It is important to distinguish backup power for ordinary PoE equipment from code-required emergency lighting. Keeping a PoE switch running on a UPS does not automatically make every connected light an approved emergency fixture.

Can a Generator Keep PoE Running?

Yes. If a building generator or another standby power system supplies the electrical circuits serving the network equipment, PoE systems can continue operating once that backup source is available.

A UPS and generator can also serve different roles. A UPS can provide immediate temporary power when utility service fails, while a generator may provide longer-duration backup after it starts.

The exact architecture depends on the facility and the importance of the systems being supported.

Why Can PoE Make Backup Power Easier?

One of the useful characteristics of Power over Ethernet is the ability to centralize power distribution.

A building might have many cameras, sensors, controllers and other devices located throughout a floor, while the PoE switches powering them are concentrated in telecommunications rooms. Providing backup power at those centralized locations can potentially maintain operation of many distributed devices.

That does not mean every PoE installation needs a UPS or generator. It means backup power can be planned around the centralized PoE infrastructure instead of necessarily providing backup power separately at every endpoint.

For buildings where continued operation is important, identifying critical PoE devices and their power requirements during design makes it much easier to determine the appropriate backup-power strategy.