Technical Resources

PoE Emergency Lighting: How Does It Work?

PoE emergency lighting provides required illumination when normal building power is interrupted. Although Power over Ethernet lighting receives power through Ethernet infrastructure rather than conventional lighting circuits, emergency fixtures still need a reliable source of backup power when the normal power supply fails.

This can be accomplished through battery-backed emergency equipment, centralized backup power or other approved system designs. The objective is the same as with conventional emergency lighting: designated lighting must remain available during an outage so occupants can safely move through and exit the building.

What Happens to PoE Lighting During a Power Outage?

A normal PoE lighting system depends on network equipment that is itself connected to the building’s electrical supply. If normal power to that equipment is lost and no backup source is available, the PoE-powered lighting connected to it will also lose power.

Emergency lighting therefore has to be considered separately during system design. Simply installing PoE fixtures does not automatically provide emergency operation.

The system needs a way to maintain illumination at the designated emergency fixtures when normal PoE power is unavailable.

How Can PoE Emergency Lighting Stay On?

There are different ways to provide backup power in a PoE lighting system. The appropriate method depends on the system architecture, project requirements and applicable codes.

One approach is to provide backup power upstream so the network equipment supplying the lighting continues operating. Depending on the design, this could involve a UPS, generator-backed electrical infrastructure or another approved emergency power source.

Another approach is to provide battery backup closer to the individual emergency fixture. An emergency driver can detect the loss of normal power and switch the fixture to battery operation.

This allows selected fixtures to continue providing emergency illumination even if the normal PoE source has gone down.

Is Every PoE Light an Emergency Light?

No. A building can contain many PoE lighting fixtures while only certain fixtures are designated for emergency operation.

Which fixtures require emergency capability depends on the building layout, means of egress and applicable life-safety requirements. Emergency illumination is typically needed along designated egress paths and in other locations required by code.

This is why emergency lighting needs to be addressed during PoE lighting design rather than added as an afterthought.

The emergency strategy can then be coordinated with the rest of the lighting, network and power infrastructure.

How Long Does Emergency Lighting Need to Operate?

Emergency lighting requirements are governed by applicable building and life-safety codes. A commonly used requirement for emergency egress illumination is at least 90 minutes following the loss of normal power.

The exact requirements for a project depend on the building, occupancy type and jurisdiction, so system designers need to verify the applicable codes and standards rather than assume every installation is identical.

Backup equipment also needs to be maintained and tested so the required emergency operation is available when it is actually needed.

Can PoE Emergency Lighting Use Battery Backup?

Yes. Battery-backed emergency drivers provide one method of maintaining illumination without keeping the entire PoE lighting infrastructure powered.

During normal operation, the fixture operates as part of the PoE lighting system while the emergency battery remains charged. If normal power is lost, the emergency equipment detects the outage and supplies power to the light from its battery.

Emergency operation may provide a different light output than the fixture’s normal operating level. The goal is to provide the required emergency illumination for the required duration rather than necessarily operate every emergency fixture at full normal output.

How Does MHT Handle PoE Emergency Lighting?

MHT Technologies developed the MHTi-EM100 as an emergency lighting solution for the Inspextor PoE platform. The low-voltage emergency driver works with an MHTi-NODE-90 and maintains an internal battery during normal operation. 

If PoE power is lost, the EM100 isolates from the node and switches into emergency mode. It provides a regulated 8 watts of emergency illumination for a minimum of 90 minutes. The unit also includes provisions for testing and battery disconnection for installation and maintenance. 

This allows emergency capability to be incorporated into the PoE lighting architecture rather than requiring emergency operation to be treated as a completely unrelated lighting system.

For more detail about the equipment and how it operates within Inspextor, see MHT’s article on PoE emergency lighting during power outages. 

Does a UPS Make Every PoE Light an Emergency Light?

Not necessarily. A UPS can keep PoE switches and connected equipment operating when normal power is interrupted, but having backup power does not by itself mean that every connected fixture satisfies the requirements for emergency lighting.

The complete system still has to be designed for the applicable emergency-lighting requirements. That includes which areas must remain illuminated, required illumination levels, operating duration, equipment requirements and testing.

A UPS can be an important part of a resilient PoE system, but emergency lighting should be treated as a life-safety design requirement rather than simply a network uptime issue.

How Is PoE Emergency Lighting Tested?

Emergency lighting needs to be capable of demonstrating that it will operate when normal power is lost. The specific testing procedure depends on the equipment, system design and applicable requirements.

Battery-backed equipment commonly provides a way to simulate a loss of normal power so emergency operation can be verified. Batteries and other emergency components also require inspection and maintenance over the life of the system.

With network-connected lighting, monitoring can potentially provide additional information about system operation, but software monitoring does not eliminate required physical testing or maintenance.

Why Plan Emergency Lighting With the PoE System?

Emergency lighting affects the lighting design, power architecture and equipment selection. Addressing it early allows designers to determine which fixtures require emergency operation and how backup power will be provided.

This is particularly important in larger PoE lighting installations where network switches, nodes, controllers and fixtures may serve many different spaces.

PoE changes how power and control reach the lighting, but it does not change the fundamental purpose of emergency illumination. PoE emergency lighting must still provide dependable light when normal building power is unavailable, while meeting the requirements that apply to the particular facility.